QB Hydrangea

Quality Buncher Hydrangea

Our Quality Buncher Hydrangea including pin belt deleafer unit is the perfect solution for hydrangea growers. With this bunching machine for hydrangea you can achieve an excellent processing capacity, without having to depend on the skills of bunching workers. The Quality Buncher is an easy to use and effective bunching machine with a very high capacity. The machine runs with the new Havatec pin belt deleafer unit.

How the system works

The hydrangea are placed manually with the heads at the same height, using a line laser or stop. For a good operation of the system, the Quality Buncher is made with a active pin belt deleafer unit that removes virtually all the leaves from the stem. The rotating knife cuts the flowers at the set length.

Constant bunch quality

During formation of the bunch, on a specially developed hydrangea pocketbelt, the leaves are stretched by means of an air stream. The resulting bunch therefore has a constant quality and surpasses the quality of hand-made bunches. The bunch is offered to the binders step by step. The reliable Havatec elastic binders make a stroke during standstill. The binders work at a steady pace and are not extremely burdened. This ensures a firmly bound bunch. The packager takes the bunches from the belt, rolls them in paper or sleeves them and then places them in an auction barrel or bucket.

Specifications:

  • Capacity between 1,000 and 4,000 stems per hour
  • The number of stems in a bunch is adjustable
  • Maximum bunch length: 85 cm
  • Minimum bunch length: 40 cm
  • SCR00646
  • SCR00662
  • SCR00823
  • SCR00831

All you need to know about the Quality Buncher Hydrangea

Our specialists are looking forward to answering any questions you might have about the Quality Buncher Hydrangea bunching machine. They enjoy personal contact.  They provide you with good advice by telephone or via video calling. On weekdays they are available from 7 am to 4:30 pm at +31 (0)252 241490. Our contactpage is available 24/7 for any questions you may have, we promise a prompt and fitting answer.

Bunching

Bunching

Flowers are automatically bunched with a preset amount without any quality loss.
Cutting

Cutting

Cut and saw units for bunches or single stems at high or low speed.
Deleafing

Deleafing

Pin-belt or brush deleafers for removing leaves from flowerstems in various Havatec machines.
Binding

Binding

Our made to measure binding lines for the flower industry with limitless combinations.
Twister bouquet line

Twister bouquet line

The Havatec Twister, automated twisted bouquets of 10-35 stems with various designs
Buncher for summer flowers

QB for summer flowers

Quality Buncher including pin belt deleafer unit is the perfect bunching machine for summer flower growers.
Tulipstar

TulipStar

Bunching machine with X-ray system that can grade tulip stems on length, straightness and weight.
Bouquet & Export lines

Bouquet line

The Bouquet line from Havatec easily ensures a fast, clean and constant quality of bouquets.
Havatec Debulber

Havatec debulber

The singulation and debulbing section processes the water-grown tulips at high speed and large numbers.
Bunching machine for tulips

QB for tulips

Our Quality Buncher is the perfect solution for small and large tulip growers.
Tulipstar XL

TulipStar XL

Bunching machine with X-ray system and wide pockets can grade tulips in length, straightness and weight.
Bindlijn

Binding lines

Havatec supplies various customer-specific flower processing lines, including binding lines
MonoStar

MonoStar

The MonoStar is a gerbera bunching machine developed for automated sorting and bunching of gerbera.
Quality Buncher Hortensia

QB Hydrangea

Our Quality Buncher including pin belt deleafer unit is the perfect solution for hydrangea growers.
TulipMixStar

MixTulipStar

MixTulipStar: automated sorting by X-ray and colour bunching of tulips by Mix version
MixStar

MixStar

The MixStar is a gerbera bunching machine for automated bunching up to 5 colours.
Quality Buncher Hyacint

QB Hyacinth

Quality Buncher Hyacinth is the perfect solution for hyacinth growers and other thick stems crops.
BulbStar

BulbStar

Fusarium infected tulip bulbs are singled out automatically and labour is reduced by 75%.
FlowMaster

FlowMaster boxes

The FlowMaster boxes is a semi-automatic insert machine for serveral gerbera boxes.
Havatec Wave

Wave

The Wave processes various cut flowers into bunches sorted by length in a fully automated manner.
FlowMaster insteekmachine voor kaarten

FlowMaster cards

The FlowMaster cards is a semi-automatic insert machine for gerbera.
QBW bunching machine

QBW bunching machine

Havatec has developed a bunching machine that is suitable for both long heavy flowers and short flowers.
Elastic binder

Elastic binder

Havatec elastic binder, on all our processing lines, as 'stand alone', in standard or high speed.
Havatec Wicl-B

Havatec Wicl-B

The Havatec Wicl-B is for wrapping bouquets and bunches of flowers with a rotating binder.
Harvest systems

Harvest systems

Customized harvesting systems with our own control system for optimal connection of machines.
Waste discharge systems

Waste discharge systems

Customised waste disposal systems, consisting elevators, conveyor belts, curved conveyor, etc.
Conveyors

Conveyors

Our conveyors form the basis for all our machine lines and are used as harvesting conveyors.
Vibratory sieve for bulbs

Vibratory sieve

The vibratory sieve vibrates sand of the bulbs so that the bulbs rolling into the cubic crate are clean.
T-Star synchro unit

T-Star synchro unit

T-Star synchro unit places the tulips at the required distance, so they end up exactly on pitch.
Silver Bullit

Silver Bullet

Box carrousel for placing, filling and wrapping bouquet packaging boxes for fast order processing.
UV decontamination tunnell

UV decontamination…

The Havatec UV decontamination tunnel is a machine for automated decontamination of trays.
Flower bulb planting line

Flower bulb planting…

With the flowerbulb planting line it is possible to have trays running on 2 sides of the belt with bulbs.
FloraStar

FloraStar

FloraStar sorts on basis of length, curve, weight and number of buds and bunches 10,000 flowers per hour.
CallaStar

CallaStar

The CallaStar is the sorting and bunching machine for processing calla/zantedeschia.
RoyalStar

RoyalStar

RoyalStar: bunching and inserting of gerbera
Terra sleeving machine

Terra sleeving machine

Sleeving machine for automatically putting all types of flower bunches or bouquets in a sleeve.
Aquamatic bucketfiller

AquaMatic

Fully automated system that uses a bucket separator system towards a conveyor belt.
Squarefill bucket filler

SquareFill

The bucket filler for auction barrels and bouquet buckets is a fully automated system where barrels and buckets…
Bucket filler for auction barrels

QuickFill

Bucket filler for all available auction barrels and possibilities for extensions
About Havatec

It was in the year 2000 that Havatec started with the development of machines for the mushroom sector. Not long after that Havatec developed an advanced machine for the grading and bunching of flower bulbs using X-ray techniques. As from 2003, Havatec has an extensive range of machines for automated grading and bunching of flowers, for packaging flowers in boxes.

Read more

boeketten
bulbstar
oog
qbhortensia
qbpioenen
tulipmixstar
twister
wave

 

Any questions?
We are glad to answer!

Contact

Landen actief picto zonder

35+

Countries active

Machines picto zonder

1.000+

Machines delivered

Personeel picto zonder

200+

Employees

Innovatief picto zonder

2+

Innovations each year

BIS pictozonder

BIS / RIS

Reliable, Innovative and Service oriented